Electrical diagnostics

  • Bộ thiết bị kiểm tra oscilloscope ( Sóng kỹ thuật số ), kiểm tra hệ thống khởi động, hệ thống sạc xe ô tô
Tài liệu sử dụng : tiếng Anh và tiếng Việt
Bộ thiết bị được kết nối qua máy Axone ( có sẳn của người mua khi mua máy kiểm tra hệ thống điện ) 
Thiết bị kết nối thông qua Bluetooth ( Thông qua RC2 có sẳn của người mua )
Hoặc kết nối qua máy tính laptop ( Có sẳn của người mua )
Kiểm tra oscilloscope 4 sóng
Kiểm tra hệ thống khởi động, hệ thống sạc xe ô tô
  • UNIPROBE oscilloscope

    UNIPROBE oscilloscope

    Reviews (969)
    Còn hàng
    UNIPROBE oscilloscope
    Model:UNIPROBE
    Mua hàng online tiết kiệm VND
    Brands:Texa - Italy
    Nhà sản xuất:
The UNIProbe is an device for analogue and digital type measurements; the best and most complete solution for all traditional diagnosis tests. The UNIProbe allows for the complete multi-make diagnosis and can intervene on cars, motorcycles, scooters, quad bikes and boats, as well as on light and heavy commercial vehicles, coaches and agricultural vehicles.
 
The UNIProbe communicates with all TEXA display units or with a Windows PC with USB connection or through Bluetooth technology, allowing the technician absolute freedom of movement around the vehicle and in the workshop. It's also fitted with an interior lithium battery that can guarantee exceptional autonomy. The UNIProbe reflects the TEXA philosophy on "two unit solutions" to the full, looking to completely eliminate wires within the workshop
MEASUREMENT SYSTEM SOFTWARE
Easy access to the amazing functions of UNIProbe is ensured by MSS (Measurement System Software), developed by TEXA especially for this device, and by the complete IDC4 software Platform.
 
The SIV (Signal Information Viewing) function deserves a special mention. This uses a software algorithm developed by TEXA specifically to compare acquired data with values recorded in an internal database. Unusual signals can therefore be identified instantly, making your work faster and easier than ever.
POWER SUPPLY
8 - 32 VDC
 
INTERNAL BATTERY RECHARGE VOLTAGE
10 - 32 VDC, built-in 7.4 V, 1Ah lithium battery
 
BATTERY AUTONOMY
up to 5 hours
 
MAXIMUM CURRENT DRAW
1,2 A at 12 V
 
AMBIENTE
Operating temperature: 0 ÷ +45°C 
Storage temperature: - 20 °C ÷ 60 °C 
Operating relative humidity: 10 % ÷ 80 % non-condensing
 
DIMENSIONS
155x178x55 mm (excluding Bluetooth antenna)
 
WEIGHT
1,2 kg.
 
OSCILLOSCOPE
 
CHANNELS
4 independent input channels with analogue bandwidth of 10 MHz (-3 dB); sampling rate 20MSamples/sec at 10 bit with 1 or 2 channels active, 10 MSamples/sec at 10 bit with 3 or 4 channels active
 
MAX INPUT VOLTAGE
+/- 50 Vmax, AC or DC couplingbr
 
VERTICAL SCALE FOR EACH CHANNEL
from 20 mV/Div to 50 V/Div
 
HORIZONTAL SCALE
from 500 ns/Div to 5s/Div
TRIGGER
source CH1, CH2, CH3, CH4, selectable, trigger delay.
 
DISPLAY MODE
Normal, Auto, Single shot
 
MEASUREMENT OF FOLLOWING VALUES
frequency, period, RMS, Vmax, Vmin.
 
MULTIMETER
 
GALVANIC INSULATION
up to 1 kV for safe measurements 
 
VOLTAGE MEASUREMENTS
Maximum measurable voltage: ± 400VDC, input impedance 4.7 MΩ, 3 digit resolution; three value ranges, with automatic or manual scale selection: 0-6 V, 6-60 V, 60-400 V AC/DC
 
RESISTANCE MEASUREMENTS
Three value ranges, with automatic or manual scale selection: 0-1000 Ω, 1-100 kΩ, 100 - 10 MΩ, resolution: 3 digits
 
CURRENT MEASUREMENTS
Current measurements performed by connecting TEXA “BICOR” series probes to the jacks on the front of the tool 
 
TNET FUNCTION
Troubleshooting on CAN ISO11898, ISO11519 networks
 
BPP FUNCTION
Troubleshooting on starting systems Voltage measurements: DC up to 50VDC
 
ELECTROMAGNETIC COMPATIBILITY
ETSI EN 301 489-17 V 1.2.1 EN 6/326/1

 

Other products

Top