Training automotive

  • Mô hình  kết nối CAN-LIN đa kênh trên xe ô tô

Mục tiêu của thiết bị này là để học viên làm quen với dữ liệu và mạng Multiplex – Đa kênh. Các thông tin được truyền qua lại bởi hai phương phức : CAN (Controller Area Network, ISO 11898-3 hoặc ISO 11.519-2 cation specifi) và LIN (Local Interconnect Network).
  • ADA 306 Automotive multiplexed CAN-LIN buses

    ADA 306 Automotive multiplexed CAN-LIN buses

    Reviews (1,329)
    Còn hàng
    ADA 306 Automotive multiplexed CAN-LIN buses
    Model:ADA-306
    Mua hàng online tiết kiệm VND
    Brands:Alecop - Spain
    Nhà sản xuất:
ADA 306 Automotive multiplexed CAN-LIN buses
Equipment for conceptual study of the data networks and multiplexing in the car.
Description
The objective of this equipment is to familiarise the student with data and multiplex networks. The information is transmitted by means of two buses: CAN (Controller Area Network, ISO 11898-3 or ISO 11519-2 specification) and LIN (Local Interconnect Network). The equipment allows the operation of the two buses implemented in real mode and in slow mode to be analysed. This latter mode allows analysis how the series data transmission, employed in all multiplexed buses, operates in a simple and very didactic way. In the real mode the two buses operate at real speed (125 Kbits/sec for the CAN and 19200 bits/sec for the LIN) whilst the slow mode can operate at 1 bits/sec or at 5 bits/sec. while makes it easy to analyse the data which has been sent.
Technical characteristics
Implementation of multiplexed comfort bus with CAN ISO 11898-3 line which is tolerant to faults at 125 Kbits/sec.
Implementation of switch and electric window control in the vehicle doors with LIN bus at 19200 bits/sec.
Test points in the different lines of the buses.
Possibility of generating dysfunctions in the different buses:
- Short circuits to battery and to earth.
- Short circuits between the lines.
- Cuts in the lines.
- Simulation of faults in the control units.
Real or slow operation selection switch. It allows analysis of operation with an oscilloscope (real operation) or using a multimeter (slow operation).
In slow mode, display of the different frames which are circulating in the buses on alphanumerical displays in hexadecimal notation.
Possibility of CAN communication using optical fibre. It substitutes the conventional wiring with optical fibre in the CANH or CANL lines.
Measurements: 446 x 270 x 100 mm.

 

Other products

Top